GW Instek AC/DC Electronic Loads
-
The PEL-3000 Series is a single-channel programmable DC electronic load with 0.01mA current resolution and the current slew rate reaching 16A/ μs. (PEL-3000H: 0.84A/us)
-
The PEL-2000A series, a multi-channel programmable DC electronic load, was a modulation design that intends to assist users to reserve the augmentation capability of future higher power requirements.
-
PEL-303xE is a single channel 300W DC electronic load. Inherited from the PEL-3000 series, PEL-3000E has an easy-to-read LCD panel and user-friendly interface.
DC Electronic Loads
-
5-digit digital voltage, current and power meter
-
Simultaneous display of voltage, current, and watts
-
Short-circuit time can be set during short-circuit test
-
Automatic test function of overcurrent protection/overpower protection
-
Maximum power up to 192KW
-
Up to 8 units of master/slave parallel control
-
5-digit digital voltage, current and power meter
-
Large LCD Display
-
Operating voltage (DC)£º0~150V(PEL-3000)/ 0~800V(PEL-3000H)
-
Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV
-
Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)
-
7 Operating Modes: CC, CV, CR, CP, CC+CV, CR+CV, CP+CV
-
Fast/ Normal Sequence Function
-
Soft Start
-
Battery discharge test
-
OCP¡¢OPP test Automation
-
Max. Slew Rate: 2.5A/us
-
Dynamic mode
-
Protection: OVP, OCP, OPP, OTP, RVP, UVP
-
Remote Sense
-
Integrate voltage, current and power measurement functions
-
External Voltage or Resistance Control
-
Rear Panel BNC¡¢Trigger IN/OUT
-
Analog External Control
-
USB/GPIB(Optional)
-
Sequence function to do high Efficient load simulations
-
Flexible configuration with mainframes and plug-in modules
-
Multiple independent load inputs up to 8 channels in a mainframe
-
Parallel connection of inputs for increased load capacity
-
Parallel connection of inputs for static and dynamic tests
-
OPP/OCP/OVP/OTP protections
-
External channel control/monitoring via an analog control connector
-
Multi-Interface USB Device / Host, RS-232C, and GPIB /LAN (Optional)
AC/DC Electronic Loads
-
CC, Linear CC, CR, CV, CP and AC Rectifier Load Mode
-
Frequency Range : DC, 40~440Hz
-
Turbo Mode for 2 Times the Current and Power of Electronic Load within 1 Second