Agilent / Varian VHS-10 Diffusion Pump
Agilent / Varian VHS-10 Diffusion Pump Agilent / Varian Diffusion Pumps Vacuum Products Malaysia, Penang, Singapore, Indonesia Supplier, Suppliers, Supply, Supplies | Hexo Industries (M) Sdn Bhd
Available in 4-inch, 6-inch, 250-mm, 10-inch, and 400-mm sizes, the VHS series pumps are the fastest and cleanest diffusion pumps of their size available today. The VHS series patented Bulge Contour doubles gas capture and maintains lower pressure. All VHS series pumps have sight glass/fill and drain assemblies for continuous monitoring and easy maintenance of pump fluid. Finned boilers increase surface area, prolonging pumping fluid life. Full thermal protection and quick-cool coils are also standard. The 4-inch, 6-inch, and 10-inch pumps can be ordered with ASA or ISO flanges, standard or extended cold caps, and a variety of voltages.

Features
  • Highest pumping speed available.
  • Fluid level sight glass provides quick indication of pump fluid status at all times.
  • Fill and drain assembly for pump oil.
  • High throughput, 5100-watt version available.
  • Fractionating jet purifies fluid.
  • High tolerable forepressure.
  • Full thermal protection.
  • Stainless steel pump body.
  • Ordering Details
  • Download VHS-10 Diffusion Pump 3D Model

Specifications

Technical Specifications 


Pumping Speed, Operating Range Pumping Speed, AVS 4.1 (1963) 3,650 l/s Air, 4,560 l/s He/H2 5,300 l/s Air
Maximum Throughput 6.3 T-l/s (8.4 mbar l/s) in operating range 7.5 T-l/s (10.0 mbar l/s) @ 0.01 torr
Operating Range 1.7 x 10-3 to <5 x 10-9 torr at 4400 W (2.3 x 10-3 to <6.5 x 10-9 mbar)
Maximum Forepressure No Load: 0.65 torr (0.85 mbar) Full Load: 0.55 torr (0.72 mbar)
Recommended Backing Pump ≥ 30 cfm (51 m3/hr)
Backstreaming Rate, Standard Cold Cap <5.0 x 10-4 mg/cm2/min
Warmup Time 15 minutes
Cooldown Time 25 minutes
Fluid Charge 1,000 cc
Electrical Requirements 3 ph, 50/60 Hz, 208/240/380/480 VAC
Pump Power 4400 watts
Cooling Water Requirements 0.40 gpm (80 l/hr)
Water Connections 1⁄8 in. FPT Tee


Ordering Information
 
Description                                         Wt. kg (lbs)                                                                    Part Number
                                                                                                                                         ASA                        ISO
VHS-10 with standard                         68 (150)                                                                F0426307             L5920307
cold cap, 208 V
VHS-10 with extended                        68 (150)                                                                F0426317             L5920317
cold cap, 208 V
VHS-10 with standard                         68 (150)                                                                F0426308             L5920308
cold cap, 240 V
VHS-10 with extended                        68 (150)                                                                 F0426318             L5920318
cold cap, 240 V
 
Accessories                                        Wt. kg (lbs)                                                                         Part Number
Water-cooled baffle                             9.0 (20.0)                                                                             F8600310
with ASA flanges
Water-cooled baffle                             9.0 (20.0)                                                                             F8600311
with ISO flanges
 
Description                                         Wt. kg (lbs)                                                                         Part Number
Accessories (Cont'd)
Centering ring for ISO foreline            0.5 (1.0)                                                                               IC063SV
flange, 63K
Installation and Operation Manual                                                                                                  699901023
 
Replacement Parts (two heaters required per pump)
2200 W, 240 V heater                        0.5 (1.0)                                                                                647310150
2550 W, 240 V heater                        0.5 (1.0)                                                                                647310155
Heater crush plate                             1.0 (2.0)                                                                                K7667001
(covers both heaters;
one required for pump; replace when
either heater is replaced)
 
Heater clamping plate                        0.5 (1.0)                                                                                R2667301
(one required per pump)
 
VHS-10/400 heater wire,                   1.0 (0.4)                                                                                X3901-68003
10 AWG 42 inches (3 per pump required)
 
Replacement o-ring kit                       1.0 (0.5)                                                                                K0377185
(kit contains: 1 inlet flange o-ring
(butyl F0430001), 1 foreline flange o-ring
(butyl 2-338), sight glass o-ring and gasket,
10 fill and drain o-rings (Viton 2-113))
 
Thermal switch                                  0.5 (1.0)                                                                                642906025
(set at 300 °F – 147 °C)
 
Extended cold cap                            2.0 (0.9)                                                                                L8917301

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version