Saluki S3502 Series Spectrum Analyzer (9kHz - Max.44GHz)
Saluki S3502 Series Spectrum Analyzer (9kHz - Max.44GHz) Saluki Spectrum Analyzers Malaysia, Penang, Singapore, Indonesia Supplier, Suppliers, Supply, Supplies | Hexo Industries (M) Sdn Bhd

Saluki S3502 series spectrum analyzer is adopted with the compact portable box structure, which has advantages of small size, light weight, low power consumption and convenient carrying. The S3502 series spectrum analyzer series currently consists of four types of products.

£¡line.gif

Key Features of S3502 Series Spectrum Analyzer

| Wide frequency range: 9kHz - Max.44GHz

| Resolution bandwidth: 1Hz - 10MHz

| Low DANL level to -163dBm@1Hz RBW (typ.)

| Excellent phase noise:  -106dBc/Hz@100kHz@1GHz carrier

| Extremely high sweep speed: <20ms for 1GHz span

| Flexible interfaces and friendly UI

| Various measurement functions and test mode options

| Portable case which can be conveniently placed and carried

| 12.1'' high brightness LCD touch screen and easy to operate



Detailed
 
 
 

Saluki S3502 series spectrum analyzer is adopted with the compact portable box structure, which has advantages of small size, light weight, low power consumption and convenient carrying. The broadband millimeter-wave receiver miniaturization integrated design technology, whole phase locking technology based on the broadband VCO, full digital intermediate frequency design technology, and microwave composite multilayer circuit board design technology are adopted for this product, thus realizing high performance indicators and ensuring the economical efficiency of the product. 

The S3502 series spectrum analyzer series currently consists of four types of products. The full spectrum of the product is equipped with a preamplifier, so that it has very high receiving sensitivity at any frequency point. For its performance indicators, it has excellent average noise level and phase noise indicator as well as the high scanning speed. For its measurement function, it has the option modes including the interference analyzer channel scanner, AM/FM/PM analyzer, and power meter, as well as a variety of measurement functions including the channel power, occupied bandwidth, adjacent channel power, audio demodulation, emission mask and carrier-to-noise ratio. This product can be used for the test and maintenance of the aviation, spaceflight, wireless communications and radar signals and devices, and it can also be used for the research, development and production of electronic products and the teaching experiment of scientific research institutes.

£¡line.gif

 

 
Typical Applications 

 

Test of Components and Parts

The S3502 series spectrum analyzer can be used for the test of parameters and indicators including the gain, frequency response, frequency conversion loss and insertion loss of the components and modules including the amplifier, filter, mixer, attenuator, cable and directional coupler.

£¡line.gif

 

Test and Diagnosis of the Transmitter and Receiver

 

The S3502 series spectrum analyzer has a number of measurement function modes including the spectrum analyzer, interference analyzer, AM/FM/PM analyzer, power meter, and channel scanner, and it also has a number of measurement functions including the channel power, occupied bandwidth, adjacent channel power, carrier-to-noise ratio, field strength, and emission mask; therefore, it can provide the comprehensive spectrum analysis and diagnosis service for the test of the transmitter and receiver. 

£¡line.gif

 
Technical Specifications of S3502 Series Spectrum Analyzer

 

Parameter Specifications
Frequency Range

                               S3502D: 9kHz - 20GHz

                               S3502E: 9kHz - 26.5GHz

                               S3502F: 9kHz - 32GHz

                                                               S3502G: 9kHz - 44GHz

Tuning resolution 1Hz
Frequency Reference Nominal fequency 10MHz
Frequency reference error

Last calibration date × aging rate + temperature stability + calibration accuracy

Aging rate

±5×10-7/year

Temperature stability

±1×10-7 (0°C - 50°C, relative to 25±5°C)

Initial calibration accuracy

±3×10-7

Frequency Readout Accuracy

± (frequency reading×frequency reference error +2% ×sweep width +10% ×resolution bandwidth)

Frequency Span Range

10μs - 600s (zero span)

Accuracy

±2.00% (zero span)

Resolution Bandwidth Range

1Hz - 10MHz (step by 1-3)

Accuracy (3.0dB)

 1kHz - 3MHz: ±10%

10MHz: ±20%

Resolution Bandwidth Change to Uncertainly

±1.20dB 1Hz - 10MHz (take 100kHz RBW as a reference)

Video Bandwidth

1Hz - 10MHz (1-3 times step)

Detection Mode

Normal, Peak, Neg Peak, Sample, Average, RMS

Display Average Noise Level

(50Ω load at the input end, 0dB input attenuation, average detector mode, logarithmic Video Type, RBW normalization to 1Hz, 20-30°C)

Preamplifier off

10MHz - 20GHz <= -138dBm
20GHz - 32GHz <= -135dBm
32GHz - 40GHz <= -127dBm
40GHz - 44GHz <= -120dBm
Preamplifier on
10MHz - 20GHz <= -157dBm
20GHz - 32GHz <= -154dBm
32GHz - 40GHz <= -148dBm
40GHz - 44GHz <= -140dBm

Residual Response

(RF input match, 0dB attenuation)

Preamplifier off

10MHz - 13GHz <= -90dBm
13GHz - 20GHz <= -85dBm
20GHz - 44GHz <= -80dBm
Preamplifier on
10MHz - 32GHz <= -100dBm
32GHz - 44GHz <= -95dBm

(Exceptional frequency: 3200MHz)

Single-sideband Phase Noise

(Carrier wave 1GHz, 20°C-30°C)

10kHz frequency offset

<= -102dBc/Hz

100kHz frequency offset <= -106dBc/Hz
1MHz frequency offset <= -111dBc/Hz
10MHz frequency offset <= -123dBc/Hz
Second Harmonic Distortion

<-60dBc (0dB attenuation, -30dBm input signal)

1dB Gain Compression

(Double-tone test, 10MHz signal spacing)

50MHz - 4GHz >= -2dBm
4GHz - 13GHz >= -3dBm
13GHz - 44GHz >= -3dBm

3-order Intermodulation Distortion 

(-25dBm double-tone signal, 100kHz spacing, 0dB attenuation, pre-amplifier off)

50MHz - 4GHz >= +7dBm
4GHz - 13GHz >= +6dBm
13GHz - 44GHz >= +6dBm

Absolute Amplitude Accuracy

(10MHz-40GHz, input

signal -10 to -50dBm, auto20°C-30°C)

10MHz - 13GHz

±1.80dB

13GHz - 44GHz

±2.30dB

Input Attenuator

Scope of attenuation 0dB - 50dB, 10dB step

Conversion uncertainty: ±1.20dB

Maximum Safe Input Level (typ.) >=10dB attenuation

+30dBm

<10dB attenuation

+23dBm

Preamplifer on +13dBm
Reference Level Range

Logarithmic scale -120dBm to+30dBm, 1dB step

Linear sacle

22.36μV - 7.07V, 0.1% ste

Convresion error

±1.20dB (reference level 0dBm  to -60dBm)

Displayed Scale

Logarithmic scale

0.1dB - 10dB per scale, minimum 0.1dB step, 10-scale display

Linear scale 10-scale display
Calibration unit

V, A, W, dBm, dBW, dBV, dBmV, dBuV, dBA, dBmA, dBuA

Scale Fidelity

±1.00 dB

 

General Information of S3502 Series Spectrum Analyzer
Size (W×H×D)

430mm×270mm×180mm (excluding the handle and foot)

430mm×360mm×180mm (including the handle and foot)

Weight <12kg
Power Supply

AC 220/240V, 50/60Hz

Power Consumption

<60W (working state)

Operating Temperature

0°C to +50°C

Storage Temperature

-40°C to +70°C

Electromagnetic Compatibility

Conforms to GJB3947A-2009 3.9.1 Requirement

Test Port

S3502D/E: Type-N (f)

S3502F/G: 2.4 mm (m)

Auxiliary Test Interface

10 MHz reference input/output: BNC female connector

External trigger input: BNC female connector

Intermediate frequency output: BNC female connector

GPS antenna input: BNC female connector

Other Interfaces

LAN, USB, VGA output

 

Standard Package of S3502 Series Spectrum Analyzer
No. Item
1

S3502 spectrum analyzer

2

Standard three-core power line

3

USB programmable cable

 

Options of S3502 Series Spectrum Analyzer
Part No. Item Description
S3502-H01

Tracking generator option

Provide the independent, tracking source scanning method

S3502-003 User manual \
S3502-005 Programming manual \
S3502-006 Purple Cat5e cable

Point to point, 2 meters

S3502-007 GPS antenna

GPS external antenna

S3502-008

USB power meter option

Provide USB power meter function 

(Needs USB power probe:009/010/011/012)

S3502-009

87230 USB continuous wave power probe

Frequency range: 9kHz - 6GHz
S3502-010 87231 USB continuous wave power probe Frequency range: 10MHz - 18GHz
S3502-011 87232 USB continuous wave power probe Frequency range: 50MHz - 26.5GHz
S3502-012 87233 USB continuous wave power probe Frequency range: 50MHz - 40GHz
S3502-013 Interference analyzer option

Provide spectrogram, RSSI measurement etc. function

S3502-014

AM/FM/PM analyzer option

To realize modulation characteristics analysis of AM/FM/PM signals

S3502-015

Channel scanner option

To realize signal power measurement of multiple channels and frequency

S3502-016

List sweep option

To realize continuous sweep measurement of various frequency bands

S3502-017

Field strength option

Realize the field strength of the dot frequency, frequency scan and list scan

S3502-018

Zero span IF output

Output the third or fourth IF signal (Choose one of two)

S3502-019

89101A antenna

Frequency range: 10kHz - 20MHz (Needs option 023)

S3502-020 89101B antenna Frequency range: 10MHz - 200MHz (Needs option 023)
S3502-021 89101C antenna Frequency range: 200MHz - 500MHz (Needs option 023)
S3502-022 89101D antenna Frequency range: 500MHz - 4GHz (Needs option 023)
S3502-023 89401 antenna amplifier

Frequency range: 10kHz - 4GHz, Type-N (f) 

(Needs option 019/020/021/022)

S3502-024 89901 antenna

Frequency range: 1GHz - 18GHz, Type-N (f)

S3502-025 89902 antenna

Frequency range: 18GHz - 40GHz, 2.92mm (f)

 


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version