Agilent FRG-700/702 Pirani Inverted Magnetron Gauge
Agilent FRG-700/702 Pirani Inverted Magnetron Gauge Agilent / Varian Vacuum Measurement Vacuum Products Malaysia, Penang, Singapore, Indonesia Supplier, Suppliers, Supply, Supplies | Hexo Industries (M) Sdn Bhd
Active Gauges

FRG-700/702 Pirani Inverted Magnetron Gauge

 

The Agilent FRG-700 Gauge is a full range gauge that provides two measuring technologies in a single, compact and economical package to measure process and base pressure from 5 x 10-9 mbar to atmosphere (3.8 x 10-9 Torr to atmosphere). The single, compact unit with one logarithmic analog output signal, significantly reduces the complexity of installation, setup and integration. The benefits are reduced cost and a marked reduction in valuable space requirements. The FRG-702 is the all-metal version of the FRG-700, incorporating a metal-sealed feedthrough. It can be operated at higher temperatures (max. 150º C at flange) than the FRG-700 (max. 55º C at flange).


FRG702REPR Repair Kit, FRG-702 Full Range Gauge
FRG702KF25 FRG-702 full range Pirani/inverted magnetron combination gauge, KF25, all metal, bakeable
FRG702CF35 FRG-702 full range Pirani/inverted magnetron combination gauge, DN40 2.75 inch ConFlat flange, all metal, bakeable
FRG702KF40 FRG-702 full Range Pirani/inverted magnetron gauge, KF40


Features
  • Provides 2 measuring technologies in a single, compact, economical package
  • Measures process and base pressure from 5 x 10-9 mbar to atmosphere (3.8 x 10-9 Torr to atmosphere)
  • A single, compact unit with one logarithmic analog output signal significantly reduces the complexity of installation, setup and integration
  • Ideal for high vacuum pressure monitoring, base pressure for evaporation and sputtering systems, and general vacuum measurement and control in the medium and high vacuum range
  • Wide measurement range from 5 x 10-9 mbar to atmosphere
  • No filament to burn out
  • Excellent ignition properties
  • Easy to clean
Specifications

Technical Specifications 
FRG-700/702 Full-Range Gauge Tubes
Measurement range 5 x 10-9 to 1000 mbar (3.8 x 10-9 to 760 Torr)
Accuracy ± 30 % of reading, typical
Repeatability ± 5 % of reading, typical
Mounting orientation Any
Admissible temperature (ambient) Operation Storage Bake-out* (Pirani) Filament Temperature
5 to 55 °C –40 to +65 °C 150 °C 120 °C
Supply voltage At gauge Ripple Power consumption
15 to 30 VDC ≤1 Vpp ≤2 W
Output signal (measurement signal) Voltage range Measurement range
0 to 10.5 V 1.82 to 8.6 V
Voltage vs. pressure 0.6 V/decade, logarithmic
Error signal <0.5 V (no supply), >9.5 V (Pirani sensor, filament rupture)
Minimum loaded impedance 10 kΩ, short-circuit proof
Response time <10 ms (@ p> 10-6 mbar), ≈1000 ms (@ p= 10-8 mbar)
Identification gauge 85 kΩ, referenced to supply common
Status Pirani-only mode Combined Pirani/cold cathode mode LED
0 V (low) 15 V to 30 (high) LED green high voltage on
Electrical connection FCC 68 appliance connector, 8 poles, female
Sensor cable 8 poles plus shielding
Maximum cable length ≤ 50 m
Operating voltage/current ≤3.3 kV/≤500 A
Materials exposed to vacuum SS, Al2O3, FPM75, Mo, Ni, Au, W
Internal volume ≈ 20 cm3
Weight DN 25 ISO-KF ≈700g, DN 40 CF ≈980g
Standards EN 61000-6-2, EN 61000-6-3, EN 61010-1
Outline Drawing
FRG-700 Series Pirani Inverted Magnetron Gauge Outline Drawing

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version