GW Instek AC/DC Electronic Loads
GW Instek AC/DC Electronic Loads GW Instek DC Electronic Load Malaysia, Penang, Singapore, Indonesia Supplier, Suppliers, Supply, Supplies | Hexo Industries (M) Sdn Bhd
  • The PEL-3000 Series is a single-channel programmable DC electronic load with 0.01mA current resolution and the current slew rate reaching 16A/ μs. (PEL-3000H: 0.84A/us)
  • The PEL-2000A series, a multi-channel programmable DC electronic load, was a modulation design that intends to assist users to reserve the augmentation capability of future higher power requirements.
  • PEL-303xE is a single channel 300W DC electronic load. Inherited from the PEL-3000 series, PEL-3000E has an easy-to-read LCD panel and user-friendly interface.


DC Electronic Loads

 
  • 5-digit digital voltage, current and power meter
  • Simultaneous display of voltage, current, and watts
  • Short-circuit time can be set during short-circuit test
  • Automatic test function of overcurrent protection/overpower protection
 
 
 
  • Maximum power up to 192KW
  • Up to 8 units of master/slave parallel control
  • 5-digit digital voltage, current and power meter
  • Large LCD Display
 
 
 
  • Operating voltage (DC)£º0~150V(PEL-3000)/ 0~800V(PEL-3000H)
  • Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV
  • Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)
 
 
 
  • 7 Operating Modes: CC, CV, CR, CP, CC+CV, CR+CV, CP+CV
  • Fast/ Normal Sequence Function
  • Soft Start
  • Battery discharge test
  • OCP¡¢OPP test Automation
  • Max. Slew Rate: 2.5A/us
  • Dynamic mode
  • Protection: OVP, OCP, OPP, OTP, RVP, UVP
  • Remote Sense
  • Integrate voltage, current and power measurement functions
  • External Voltage or Resistance Control
  • Rear Panel BNC¡¢Trigger IN/OUT
  • Analog External Control
  • USB/GPIB(Optional)
 
 
 
  • Sequence function to do high Efficient load simulations
  • Flexible configuration with mainframes and plug-in modules
  • Multiple independent load inputs up to 8 channels in a mainframe
  • Parallel connection of inputs for increased load capacity
  • Parallel connection of inputs for static and dynamic tests
  • OPP/OCP/OVP/OTP protections
  • External channel control/monitoring via an analog control connector
  • Multi-Interface USB Device / Host, RS-232C, and GPIB /LAN (Optional)
 


AC/DC Electronic Loads
 
  • CC, Linear CC, CR, CV, CP and AC Rectifier Load Mode
  • Frequency Range : DC, 40~440Hz
  • Turbo Mode for 2 Times the Current and Power of Electronic Load within 1 Second
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version