The CA700 is a highly accurate and highly functional pressure calibrator specifically designed for the calibration of differential pressure and pressure transmitters, which are widely used in plant processes these days and are improving in terms of accuracy and functionality.
-
The CA700 Pressure Calibrator has a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading on Current/Voltage source/measurement, which makes it the most accurate calibrator in the portable calibrator class. It also has the highest resolution and widest range of any portable instrument, with a resolution of 0.001 kpa (200.00 kpa range) and a resolution of 0.0001 psi (at the 29 psi range). A high pressure module, the PM100, is now available, that effectively increases the pressure range of the CA700 to 2300 PSI, all the while maintaining the same basic accuracy of 0.01%.
Brochures
- CA700 Pressure Calibrator (7.7 MB)
- Process Test Tools Selection Guide (2.0 MB)
Specifications
-Pressure is one of the most important and commonly measured forces in industrial plants and sites. Other commonly measured forces, such as temperature, flow and level, can all be derived from pressure. Because of this, pressure transmitters are especially crucial for maintaining the health and safety of plant operations. For a pressure transmitter to perform reliably, periodic calibration of these devices is absolutely necessary. Yokogawa's pressure calibrators are specifically suited for this task due to their:
Dedicated Functionality
- Supports customizable, bulit-in ''AS-FOUND'' and ''AS LEFT'' routines
- Can be used as a data logger or USB storage
- Integration with FieldMate 3.03 for an all-in-one calibration system
- Integration with pressure modules to calibrate up to 2.3K PSI
Accuracy
- Best in class accuracy for the portable pressure calibrator product line
- Utilizes the same high quality Yokogawa patented dPharp sensor technology
- Different pressure ranges allow maximum resolution, no matter the situation
Durability
-
Built with you in mind - Reliable, rugged, and battery-powered
-
IP54 dust and water proof case for harsh enviroments
-
Light-weight and built-in stand
The CA700 Pressure Calibrator is the most accurate calibrator in the portable class having a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading on Current/Voltage source measurement. Supporting “As Found”, “As Left” and error rate, makes the CA700 a great tool for field calibration and maintenance work. Available in low pressure, medium pressure or high pressure ranges with selectable high-performance hand pumps for each range. Pressure modules are available which extend the range of the CA700 when calibrating higher pressures.
Portability meets accuracy
- Accuracy 0.01% rdg for Pressure / 0.015% rdg for Current/Voltage (source/measurement)
- Highest resolution class 0.001kPa (200.000 kPa range) 0.0001 psi (29 psi range)
Perfectly engineered for pressure calibration
- “As Found”, “As Left” and error rate (%)
- IP54 dustproof and water proof case for harsh environments
- 4-20mA step function for signal generation
- 20mA Simulator to carry out loop test.
- Two-wire Transmitter Loop Check
- 250-ohm resistor for HART and BRAIN communication
- Supports compatibility with FieldMate 3.03 for a fully integrated calibration system
Model Numbers
Model | Description |
---|---|
CA700-E-03-U2-P1 | 3500kPa, RC 1/4'' Female Thread |
CA700-E-01-U2-P2 | 200kPa, 1/4'' NPT Female Thread |
CA700-E-02-U2-P2 | 1000kPa, 1/4'' NPT Female Thread |
CA700-E-02-U2-P1 | 1000kPa, RC 1/4'' Female Thread |
CA700-E-03-U2-P2 | 3500kPa, 1/4'' NPT Female Thread |
CA700-E-01-U2-P1 | 200kPa, RC 1/4'' Female Thread |
Accessories
External pressure sensor PM100 (Accessory for CA700)
- PM100 External Pressure Sensor
- Enables pressure calibration in even higher pressure ranges using CA700
- Up to 70 MP
98064 Lead Cables
Alligator clip, CAT I, for controlsignal only (under 70 V)One set of 1 red and 1 black cablesLength: Approx. 1.7m
91052 Hand Pump Connector (Low Pressure)
Connector set for the 91051 (quick adapter, pressure conversion adapter, flexible hose, sealing tape)
91057 Hand Pump Connector (Pneumatic)
Connector set for the 91056 (quick adapter, sealing cap, flexible hose, sealing tape, and hex wrench)
91062 Hand Pump Connector (Hydraulic)
Connector set for the 91061 (high-pressure hose, quick adapter, conversion adapter, sealing tape, and hex wrench)
93053 Hand Pump Case (Pneumatic/Hydraulic)
Case for the 91056/91061 (91056, 91057, 91061, 91062, and instruction manual)